Asus A8N32-SLI Deluxe and Corsair XMS 3500LL-Pro setup guide

From lurkmore wiki
Jump to navigationJump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

These settings work extremely well, X2 4400+ overclocked at 2750MHz and memory at 250MHz CL2.5-3-2-6 1T. Settings tested and tweaked by King_John.

JumperFree Configuration: CPU (X2 4400+ @ 2750 MHz)
AI Overclocking Manual
CPU FSB Frequency 250
SB to NB OverClock Manual
SB to NB Frequency 200
Adjust PCIE Frequency 100
PEG link mode Disabled
Over-Voltage CPU Vcore Enabled
Over-Voltage NB Vcore Disabled
Over-Voltage SB Vcore Disabled
Over-Voltage Hypertransport Disabled
DDR VCORE 2.65V-2.7V (don't go over 2.9V)
FID/VID Change Manual
Processor Frequency Multiplier 11x
Processor Voltage 1.3 (CPU over-voltage adds 0.2V)
AI Clock Skew Auto/Auto


CPU Configuration: MEMORY (Corsair 3500LL-Pro @ 250MHz)
GART Error Reporting Disabled
MTRR Mapping Continuous
1T/2T memory timing 1T
Memory Setting: Memory Configuration
Memclock Mode Limit
Memclock Value 200 (1:1)
MCT Timing Mode Manual
CAS Latency (CL) 2.5
TRAS 6 CLK
TRP 2 CLK
TRCD 3 CLK
TRRD 2T
TRC 8T
TRFC 24T
TRWT 2 CLK
MCT Extra Timing Mode Manual
TREF 7.8 us
TWCL 1
R/W Queue Bypass Count 8
ByPass Max 4
Idle Cycle Limit 64
Dynamic Idle Cycle Counter Disabled
DDR Driving Strength Normal
Enable 32-Byte Granularity Disabled
TWR 2 CLK
DDR Input Strobe skew Disabled
DDR Data Driving Strength Disabled
User Config Mode Manual
Read Preamble 9.5ns
Asyc Latency 11.0ns
Bank Interleaving Auto
Burst Length 4 Beats
Hardware Memory Hole Disabled
Memory Setting: ECC Configuration
L2 Cache BG Scrub Disabled
Data Cache BG Scrub Disabled


Chipset: CHIPSET (Asus A8N32-SLI Deluxe)
K8 to NB Frequency 4X
K8 to NB LinkWidth 16/16
SB to NB Frequency 5X
SB to NB LinkWidth 16/16
Primary Graphics Adapter PciE1->PCI->PciE2

! Important !

AMD Cool 'N Quiet off!
Disable Legacy USB otherwise your computer will be a pile of poop!
Do not go over 1.55V on your Processor Voltage!