From LURKMORE wiki
Revision as of 22:46, 10 October 2013 by Kyrio (talk | contribs)
Jump to navigationJump to search

Tcgminer.conf is the default configuration file in cgminer. If the file doesn't already exist in the cgminer folder, create it and add settings as needed. The first section below is the minimum needed to get running with a config file.

The following config is for scrypt based cryptocoin mining, such as Litecoin or MinCoin. These settings are generally tailored to the HD 7950 GPU, and can easily be adjust for any other GPU. For more information on what settings other people have used, see the mining hardware comparison on this wiki and also on the official Litecoin wiki.

"pools" : [
		"url" : "stratum+tcp://",
		"user" : "lurkmore.e",
		"pass" : "1"
		"url" : "stratum+tcp://",
		"user" : "lurkmore.e",
		"pass" : "1"

"intensity" : "20",
"scrypt" : true,
"thread-concurrency" : "24000",
"worksize" : "256",

"kernel-path" : "/usr/local/bin"

Tweaking the thread-concurrency flag will help you tune the maximum hashrate. Some GPUs, such as HD 7970s, would use an intensity of 13.

For mining SHA-256d coins, such as Bitcoin, you could just remove all flags other than intensity; cgminer will usually select the best configuration.

Slightly more advanced options to add to the above config:

"api-allow" : "",
"api-listen" : true,
"auto-fan" : true,
"gpu-engine" : "1000",
"gpu-memclock" : "1250",
"gpu-powertune" : "0",
"gpu-vddc" : "1.125",
"temp-target" : "70",
"queue" : "0",

Of course, all of the above settings would require modification to match your own hardware and needs.

External links